Install SPS Abator - Hot Springs & Ft. Meade VAMC, SD

This project consisted of installing an abator to remove the ETO Gasses that the Sterilizers release into the atmosphere.  The system utilizes PVC pipe and a fan to catch any gasses and copper pipe to push the main exhaust to the abator.   It then is pushed through a medium that abates the gas and the remaining air is vented outside.  A Chem Daq gas monitoring system was also installed to monitor any gas leaks from the system inside the building.  This system was installed in both the Hot Springs and Ft. Meade locations.

 SPS Abator during install

SPS Abator during install

© JE HURLEY Construction, Inc.